LED Track Lights

LED track lights start with the track standard, because H, J, and L systems do not interchange, and every fixture here ships free with live stock status on each product page. The guidance below the products identifies your track in thirty seconds, then covers beam angles and CBCP for retail accent work.

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

LED Track Lighting Selection Guide

LED Track Lights Start With the Track Standard

The most common mistake in this category is buying a track head that does not fit the track already on the ceiling. Three incompatible standards, H, J, and L, dominate North American line voltage track, and nothing about a fixture's appearance makes the difference obvious. Identify the standard first; every other decision about led track lighting follows from it. This page shows you how, then covers the beam and color choices that make retail and gallery accent work actually look right.

Beam Angles and CBCP for Retail and Gallery Accent Work

Accent lighting is a contrast game: merchandise or artwork should sit roughly five times brighter than its surroundings to read as featured. Two numbers control that. Beam angle sets the size of the pool: 15 to 25 degree spots isolate a single product, mannequin, or canvas, while 30 to 40 degree floods wash a shelf run or feature wall. CBCP, center beam candlepower, measures punch at the middle of the beam, and it is why two heads with identical lumen ratings perform differently at distance. The longer the throw from track to target, the narrower the beam and the higher the CBCP you need to hold contrast.

3000K or 4000K for Merchandise

Warm goods reward warm light: wood, leather, fashion, baked goods, and hospitality interiors look best at 3000K. Jewelry, electronics, appliances, and white or cool toned merchandise sharpen under 4000K. Galleries commonly run 3000K to 3500K with high CRI to keep pigments honest. The discipline that matters most is consistency: pick one color temperature per sightline, because mixed CCTs on one track read as a mistake from across the room.

Laying Out Track and Power

Track mounts flat to a ceiling junction box, runs along walls, or suspends on rods or cables where the deck is high. Single circuit track switches every head together; multi circuit track carries separately switched circuits in one rail, so window displays can burn after hours while the sales floor sleeps. LED heads draw a fraction of what halogen did, so long runs of many heads rarely approach a circuit's capacity, but total connected wattage still has to stay within the track's rating listed on its product page. Heads reposition and re aim without tools, which is the whole argument for track in spaces where merchandise moves.

Quick Ship for Spaces That Change Weekly

Retail resets, gallery rotations, and restaurant refreshes do not wait on lighting lead times. Every QuickShipLights product page shows live stock status, in stock items ship within 24 hours, and shipping is free on every order. For fixed general lighting alongside the track, see LED Strip Lights and LED Tape Light, browse the parent Surface Mount Lights range, or switch to Mini Pendant Lights and Linear Pendants where a decorative fixture beats an adjustable one. Compatibility questions? Send the track details through the QuickShipLights support portal and we will confirm the fit before you order.

H, J, or L: Identify Your Track in 30 Seconds

StandardAlso Sold AsHow to Identify the Head AdapterFits
H typeHalo compatibleThree contacts on the adapter stemH track only
J typeJuno compatibleTwo contact tips about 1 inch apartJ track only
L typeLightolier compatibleTwo contact tips about 7/8 inch apartL track only

To check an existing installation, twist one head out of the track and count the contacts on its adapter; two contact systems are then separated by measuring the tip spacing. Heads and track sections of the same standard interchange across brands that publish compatibility, so an H type head from one manufacturer runs on H track from another. When replacing heads on an unknown system, bring the old head's adapter to the spec sheet, not the other way around.

Frequently Asked Questions About LED Track Lighting

Twist a head out of the track and look at its adapter. Three contacts on the stem means H type, Halo compatible. Two contacts means J or L: tips about 1 inch apart are J type, Juno compatible, and tips about 7/8 inch apart are L type, Lightolier compatible. The three standards do not interchange, so identify before buying heads.

Usually yes. Line voltage track built to the H, J, or L standard accepts any head of the same standard, and modern LED heads are made for all three. The track carries 120V either way; the LED conversion happens inside the head. Match the standard, keep total wattage within the track rating, and the swap is tool free. Two circuit track needs heads set to the correct circuit.

Use a 15 to 25 degree spot to isolate a single piece or product, and a 30 to 40 degree flood to wash a shelf run or feature wall. The farther the track sits from the target, the narrower the beam needed to hold intensity. Aim heads at roughly 30 degrees from vertical onto art to limit glare and frame shadows.

CBCP, center beam candlepower, measures the intensity at the center of a head's beam. It predicts how much punch reaches the target at distance far better than a lumen rating, because lumens count total output in all directions while CBCP counts the concentrated core. Two 900 lumen heads can differ several fold in CBCP; for accent work at long throws, buy on CBCP.

Single circuit track powers every head from one switched circuit, so the whole run switches and dims together. Multi circuit track carries two or more independently switched circuits in the same rail, letting you split window displays, general zones, and after hours lighting along one physical track. Heads select the circuit at the adapter. Multi circuit costs more but saves running a second rail.

Yes. Track systems hang on rigid stems or aircraft cable suspension kits, which brings the heads down from tall retail and gallery ceilings to a height where accent beams stay controlled. Power feeds through the suspension point or a cord drop. Keep the drop consistent across a room so the rails read as one plane, and confirm the suspension kit matches the track series.

Stay within the track's rated capacity, listed on its product page, counting the actual wattage of each head. LED heads commonly draw 10 to 25 watts, so a run that once maxed out with a handful of halogen heads can carry many LED heads without approaching the limit. The practical constraints become spacing and aiming, roughly one head per featured item or wall section.