Lighted Mirrors

Lighted mirrors in standard sizes with full published specs, the alternative to made to order lines and their long lead times, in stock and ready to ship with free shipping on every order. The guidance below the products covers CRI, color temperature, anti-fog pads, and dimming.

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Lighted Mirror Buying Guide

Lighted Mirrors Without the Made to Order Wait

Most premium lighted mirror lines are built to order, and built to order means weeks between purchase and installation. QuickShipLights takes the other side of that trade: standard sized lighted mirrors with full published specifications, live stock status on every product page, and free shipping on every order. A hotel replacing forty vanity mirrors on a renovation schedule and a homeowner finishing one bathroom get the same two answers before checkout: exactly what the mirror does, and when it ships.

Where a Bathroom Mirror With Lights Can Be Installed

A bathroom mirror with lights lives in a damp environment by definition. Fixtures installed in a bathroom but outside the tub or shower zone need a damp location listing, and anything subject to splashing should carry an IP44 rating, which resists water spray from any direction and suits the wall above a lavatory. Keep any lighted mirror out of the shower enclosure itself unless it is specifically listed for that exposure. Most units hardwire to a junction box concealed behind the mirror body; some models include a cord and plug for retrofits where opening the wall is not practical.

ADA Mounting Height for Commercial Projects

For accessible design in hotels, multifamily units, and commercial restrooms, mount mirrors above a lavatory or counter so the bottom edge of the reflecting surface is no more than 40 inches above the finished floor. Mirrors not located above a counter can go lower, with the bottom edge at a maximum of 35 inches. Plan the junction box location before drywall closes so the finished mirror lands at a compliant height with no exposed wiring.

Sizing an LED Vanity Mirror

The working rule for an LED vanity mirror is to keep it 2 to 4 inches narrower than the vanity cabinet below. Over a double vanity, use either one wide mirror spanning both sinks or two matched mirrors centered on each basin. A vanity mirror with lights can carry the task lighting alone or work alongside wall fixtures; if you prefer a traditional bar fixture over plain glass, browse Vanity Lights instead.

Built for Hospitality and Multifamily Specs

Property wide specifications need consistent color temperature from unit to unit, hardwired installation, and replacement availability years into the service life. Standard stocked sizes make one for one swaps practical in year five, something custom built mirrors cannot promise. For the rest of the wall mounted lineup, see Indoor Wall Lights, add Bedside Reading Lights in guest rooms, and cover corridors with Step Lights. Questions on sizing or wiring? Reach our lighting team through the QuickShipLights support portal before you order.

LED Bathroom Mirror Light Quality: CRI and Color Temperature

Grooming is a color critical task, so light quality is the first spec to check on any LED bathroom mirror. Look for a color rendering index of 90 or higher so skin tones read accurately for makeup and shaving. Color temperature matters just as much: 2700K to 3000K is warm and matches most residential fixture schemes, 4000K reads neutral, and 5000K to 6500K approximates daylight for detailed makeup work. Many models are CCT selectable, switching between settings from a control on the glass, so one mirror covers every preference in the household or across a property.

Front Lit, Backlit, or Combination

TypeHow It LightsStrengthBest Fit
Front litDiffused LED strips on the face of the glass, usually top and sidesDirect, even facial illumination with minimal shadowingMakeup stations, primary bath vanities, hotel bathrooms
BacklitLEDs behind the mirror perimeter wash light onto the wallSoft ambient halo with no glare at eye levelPowder rooms, corridors, ambient minded bathrooms
CombinationFront and back circuits, often switched separatelyTask light and ambient glow from one unitHotel and multifamily baths, primary suites

Anti-Fog Pads and Dimming

An anti-fog pad is a low wattage heating film bonded behind the glass that keeps the surface a few degrees above the dew point, so the mirror stays clear during and after a shower. Pads are switched with the light or on a separate control depending on the model. Integrated dimming, from a touch sensor on the glass or a compatible wall dimmer, lets the same mirror serve bright morning grooming and low nighttime use. Confirm dimmer compatibility on the product page before pairing a mirror with a wall control.

Frequently Asked Questions About Lighted Mirrors

A front lit mirror places diffused LED strips on the face of the glass, throwing light directly at you for even, shadow free grooming. A backlit mirror hides the LEDs behind the perimeter so light washes the wall in a soft halo, which looks dramatic but lights the room more than your face. Combination models do both, with the circuits often switched separately.

Most lighted mirrors hardwire to a junction box concealed behind the mirror body, which gives the cleanest result and is standard in new construction and hotel work. Some models include a cord and plug for retrofit installations where opening the wall is not practical. Check the product page for the connection type before ordering, and rough in the box location before drywall when you can.

When a mirror is mounted above a lavatory or countertop, accessible design standards call for the bottom edge of the reflecting surface to sit no more than 40 inches above the finished floor. A mirror not located above a counter can be mounted with its bottom edge up to 35 inches above the floor. These heights apply to hotels, multifamily projects, and commercial restrooms.

An anti-fog mirror uses a thin heating film bonded to the back of the glass. It warms the surface a few degrees above the dew point of the room, so steam from a shower cannot condense on it. The pad draws modest wattage and switches on with the light or from its own control, depending on the model.

Daylight range light, roughly 5000K to 6500K, shows makeup the way it will look outdoors, while 2700K to 3000K matches warm interior lighting. The practical answer is a CCT selectable mirror: switch to daylight for application, then back to warm to preview how the result reads under typical indoor light. High CRI, 90 or above, matters at every setting.

Yes, that is the intended environment. Lighted mirrors for bath use carry a damp location listing, and models rated IP44 resist splashing water from any direction, which suits the wall above a sink. Do not install a standard lighted mirror inside a shower enclosure or anywhere it takes direct spray unless the listing specifically allows it.

Integrated LED strips in quality mirrors are typically rated in the tens of thousands of hours, which works out to well over a decade of normal bathroom use. The LEDs are built in rather than replaceable lamps, so treat rated life as the service life of the lighting function and check the rating on the product page for the specific model.