Our Blog

Bulkhead fixtures show up on more job types than most contractors give them credit for: apartment breezeways, hotel corridor exits, courtyard perimeter walls, back-of-house doors at retail and restaurant sites. The spec is usually simple, wall-mount, wet-location rated, dusk-to-dawn, but the SKU count behind that simple spec adds up fast once you factor in wattage, CCT, and finish. The Westgate BKH Traditional Bulkhead collapses most of that variation into two base models: a 6/8/10W unit at 850 …

The FDLO Series ships as a 32.5-inch oval double-ring flush mount with a field-select switch that sets 2700K, 3000K, 3500K, 4000K, or 5000K on install day. Every finish shares the same 48W DOB driver, IP44 damp-location housing, and 120-degree beam. Miss the CCT call before the corridor ceiling closes up, and the fix is a flip of a switch on install day, not a return authorization. Two kinds of orders keep this series moving: a property management team standardizing corridor lighting across a mu …

MaxLite's FlatMax G6 turns three separate flat panel SKUs into one line item on a takeoff: 1x4, 2x2, and 2x4, all on the same controls-ready platform, all with CCT and wattage set in the field instead of locked at the factory. That matters on a real relamp job, where a building running corridor troffers, office grids, and open-area panels usually means three part numbers to track instead of one. The line carries DLC Premium efficacy up to 150 LPW, 0-10V dimming standard, and a 10-year warranty b …

A 40W or 60W wall pack over a service door does more than light the door. It casts a glare across the lot and emits more light than a small entry needs. The LMW mini cutoff wall pack line exists for the jobs where a full-size wall pack is the wrong fixture: entryways, alleys, loading docks, pathways, balconies, and small retail bays. It delivers 1300 lumens at 12W in a die-cast housing about the footprint of a large deadbolt plate. Season 2 pricing on the line is now live in the RelightDepot tra …

Lotus LED's 5CCT COB tape line ships as two SKUs on one driver platform: a dry-location strip and a sealed, wet-rated strip, both selectable across the same five color temperatures, 2700K, 3000K, 3500K, 4000K, and 5000K. That selection happens at the driver, not the tape, and both models run COB construction with a CRI of 90 or higher, so neither shows a hotspot whether it lands in a finished channel or bare against a cedar wall. Pair the wrong driver, one without the 5CCT switch, and the field …

The SLE-EL step light ships as five fixtures in one box. Set the field-select switch to 2700K, 3000K, 3500K, 4000K, or 5000K on install day, on the same 3W integrated LED module, IP65 wet-location polycarbonate housing, and 120-degree beam that every SKU in the line shares. Get the CCT wrong on a building, and fixing it is a two-second flip of a switch, not a return authorization. Two kinds of orders keep this series moving: a facility team standardizing stair lighting across a multifamily portf …

Westgate's LFX Multi-Power Flood Light does something most fixtures on a takeoff sheet can't: it changes its own wattage. Set the driver to 50W, 80W, 100W, or 150W before it goes live, and the same die-cast aluminum body, rated IP65 with 10KV surge protection, pushes up to 21,400 lumens at 135 LPW, whichever tier the job calls for. No separate SKU for the loading dock versus the pathway. One fixture flexes to both. That flexibility matters most in the two jobs where floodlights are actually pull …

The AE Switch Series puts full field control over wattage, CCT, and distribution into one MaxLite Value Series platform. Instead of ordering a fixed Type III, IV, or V distribution pattern at a fixed color temperature, the installer sets the configuration on site, and the newest AE Switch fixtures add a ground-level remote that changes CCT and distribution even after the area light is mounted and energized. Electrical contractors standardizing a parking lot or site lighting package, and facility …

Most mixed-facility jobs default to a separate strip light SKU for every wattage and CCT call: split lead times, multiple submittals, and more line items than the job needs. The MaxLite LS3 Series cuts that down to one controls-ready platform across three sizes (2, 4, and 8 ft), with field-selectable wattage and CCT built into every unit. Here is what the line covers, how to pick within it, and what to confirm before you commit to a rough-in. Field-Selectable Platform: What It Means for Procure …

Flush mount fixtures like the FLT Series are built for projects where clean surface-mounted lighting has to work within existing ceiling conditions, limited rough-in flexibility, and fast turnover schedules. Corridors, stairwells, multifamily common areas, hospitality back-of-house, and renovation packages all create the same problem: the ceiling condition is already deciding the fixture before procurement starts. The value is not appearance. It is flexibility when field conditions stop matching …